Skip to content
What sleeves does your shuffler work with?
The Mini, Standard, and XL sizes of all of our shufflers are designed to work with “Standard” sized sleeves, up to 66mm x 91mm. Most of the major sleeves for “Standard Sized” cards, including Magic: the Gathering and Pokémon are in this size range and should work. We have tested with Cortex, Dragon Shield, Eclipse, HyperMAT, Katana, GameGenic, and UltraPro sleeves, as well as several off-brand sleeves.
- Notes on specific sleeves:
- Pokemon ETB (Elite Trainer Box) sleeves are oversized and will only fit in the “Updated Version” of the shuffler (aka 2.0)
- Dragon Shield “Outer Sleeves” are too large and will not fit in our Mini, Standard or XL series shufflers. Contact us directly to inquire about a custom “XXL” version we are working on to fit these extra-extra large sleeves!
- “Japanese Sized” cards, such as Yu-Gi-Oh are not supported at this time. We are working on solutions for these sized cards.
Can I switch from sleeved to un-sleeved cards?
Yes you can. Our shufflers will work with un-sleeved cards, however as they are designed for sleeved cards, it may grab additional cards at a time, and might need a slight adjustment if you plan to use primarily un-sleeved cards. Also, please be aware that with un-sleeved cards, the edges of your cards are unprotected, and the cards may catch each other on those unprotected edges at times, however it should not bend an un-sleeved card.
Can I switch from double-sleeved to single-sleeved cards?
Yes! The Standard and the XL versions of our shufflers can work with both single-sleeved cards and double-sleeved cards. The default setup of your shuffler should support both, but it is also adjustable to your preference, and to fit your exact sleeves. There are screws on the front and rear of the shuffler to adjust the pass-through slot for cards, so you can tune your shuffler, as needed.
What double-sleeved card pairings are supported?
Double-sleeved pairings will work using a Standard-sized sleeve for the outside, and a “perfect-fit” or “penny sleeve” style inside sleeve. Dragon Shield Outer Sleeves are not supported.
For Example, “Perfect Fit” inner with a standard Dragon Shield Matte for the outside, or a penny sleeve inside with an Eclipse on the outside.
What about Dragon Shield Outer Sleeves?
Our Mini, Standard and XL are NOT compatible with the Dragon Shield “Outer Sleeves”. They are much larger than standard sleeves, and will not fit. However, we are working on an “XXL” option to fit these. Contact us for a custom order.
Do you do customer colors, designs, words, etc?
Yes! We can work with you for a custom design, colors, or words for your shufflers. Prices vary based on the design time, filament custom ordered, print time, etc, but typically start at an additional $20.00 to the price of your shuffler.
Do you ship to me?
Probably yes. We are based in the United States, and will ship Internationally to any country not otherwise banned for shipping from the USA. Our preferred shipping carrier is the United States Postal Service (USPS), but we can ship with UPS or FedEx upon request. If you require a different carrier, please contact us directly to inquire
Help! My shuffler isn’t working properly!
Please check out our support page for information and solutions to common issues. If you need additional support, please contact us, as we want you to have a great experience with our product